How to fix Jensen Stereo System when radio will not turn on?
If your Jensen Stereo System radio won't turn on or the front panel isn't working, try pressing the reset button. Also, check the fuse, ensure there's 12V+ on the accessory wire (RED wire), and verify the ground connection.
What to do if my Jensen JWM40 Stereo System turns on but there is no sound?
If your Jensen Stereo System turns on but produces no sound, first check that the volume, fader/balance, and mute controls are correctly set. Then, try the reset button. Make sure the correct speaker selection is made, the speaker connections are properly connected, and inspect the speaker wires for shorts or open circuits.
What to do if Jensen JWM40 unit does not respond to remote control?
If your Jensen Stereo System isn't responding to the remote control, ensure there is a clear line of sight for the IR signal. Check the batteries in the remote and confirm the remote IR sensor is plugged into the IR input, if applicable.
Why is there no AM or FM reception on my Jensen JWM40?
If you're not getting any AM or FM reception on your Jensen Stereo System, first verify that you are tuned to a valid station. Then, check the antenna connection on the rear of the stereo. If the issue persists, try using a different antenna.
Why does my Jensen JWM40 CD/DVD not play correctly?
If your Jensen Stereo System CD/DVD isn't playing correctly, first, check that the disc is inserted correctly. Verify the disc is clean and free from scratches. Try playing factory CDs. Inspect the radio's chassis to verify the shipping screws have been removed. Check factory original CDs for compatibility warnings.
What to do if CD/DVD does not load fully in Jensen Stereo System?
If the CD/DVD in your Jensen Stereo System isn't loading fully, ensure the unit has power and that no other CD/DVD is currently inside. Also, make sure the transport screw has been removed from the rear of the unit. If the transport screw is not removed, the disc will load for several seconds and then eject.
How to fix Jensen JWM40 Stereo System DVD when it plays sound but no video?
If your Jensen Stereo System DVD plays sound but no video, make sure the HDMI cable is routed from the HDMI output to the input on the television.
Lists key features of the JWM40 mobile audio system.
Important safety and usage warnings for the unit.
Details items included in the product package.
Lists supported disc formats and their properties.
Guidelines for cleaning and handling discs.
Required tools and materials for installation.
Safety procedure before installation.
Advice on choosing a spot and cutting the hole.
Details all audio/video connection points.
Turning the unit on/off and adjusting volume.
Adjusting Bass, Treble, Balance, and Fade.
Accessing and adjusting system configurations.
Configuring Bluetooth and connecting devices.
Streaming audio, selecting tracks, and pausing.
Storing, recalling, and scanning radio stations.
Methods for selecting radio frequencies.
Inserting, ejecting, pausing, and stopping CDs.
Track select, FF/RW, Repeat, Shuffle.
Using remote for track entry and direct access.
Inserting, ejecting, pausing, stopping DVDs.
Track select, Enter/Select, Language Selection.
FF/RW, Repeat, and specific remote functions.
Using remote for file entry and direct chapter access.
Using remote for file entry and direct chapter access.
Monitor display and inserting USB devices.
Play/Pause, Track Select, Folder navigation.
Using repeat and random shuffle functions.
Adjusting playback speed for MP3/USB.
Using remote for file entry and direct access.
Display details during MP3 playback.
Overview and settings for Bluetooth.
Connecting devices and streaming audio.
Selecting tracks and pausing playback.
Power, Volume, Tuning, Enter, Alarm, Language, Mute/Loudness.
Play/Pause, Stop, FF/RW, Previous/Next, Directional buttons.
Eject, Title, Repeat, Source selection.
Numeric Keyboard, Setup, Subtitle.
Zoom, Angle, Audio, GOTO, Display, AS/PS, Menu functions.
Setting the audio language for DVD playback.
Setting the subtitle language for DVD playback.
Setting the menu language for DVD playback.
Setting DVD password and rating.
Setting the aspect ratio for DVD playback.
Factors affecting radio reception.
Technical details for FM/AM tuners and amplifier.
Technical details for DVD and overall unit.
General| Brand | Jensen |
|---|---|
| Model | JWM40 |
| Category | Stereo System |
| Output power | 20 Watts RMS |
| Bluetooth | Yes |
| CD Player | Yes |
| FM Radio | Yes |
| USB Port | Yes |
| Aux Input | Yes |
| Playable formats | CD, CD-R, CD-RW, MP3 |
| Tuner bands | FM |
| Weight | 5.5 lbs |
| Speaker Configuration | 2.0 Channel |
| Frequency Response | 20 Hz - 20 kHz |
| Input Voltage | 120V AC |
To Next Page
