Jensen JWM22 - User Manual

P.SCAN
HDMI
Basic Operation
AM/FM: Press to cycle through radio
source mode.
R
BT/USB: Press to cycle through
BLUETOOTH and USB source mode.
HDMI/AUX: Press to cycle through
HDMI IN and REAR AUX source mode.
VOLUME: Press the VOLUME UP
button to increase volume.
Press the VOLUME DOWN button
to decrease volume.
POWER/DIM: Press to turn ON.
Press again to switch the DIMMER
(On/Off).
Hold to turn OFF and enter standby
mode.
BACK: Press to exit any menu.
HDMI IN: Connect HDMI cable from
device.
RESET: Use a ball point pen or thin
metal object to press the reset.
AUDIO: Hold to bring up AUDIO
ADJUSTMENT options: BASS, TREBLE,
BALANCE (left to right), FADE (front to
rear), & Loudness (ON/OFF).
SPEAKER ZONE A:
Press to select
speaker zone output.
SETTINGS:
Hold to bring up SETTING
MENU options: BLUETOOTH Device
List, BLUETOOTH PAIR, BLUETOOTH
(ON/OFF), DIMMING (ON/OFF),
DIMMING LEVEL, PRESET VOLUME,
TIME (12/24) and RESET.
Press and buttons to select each
SETTING option except for 'RESET'.
SPEAKER ZONE B:
Press to select
speaker zone output.
P.SCAN
HDMI
AM/FM: Press to change source to
radio mode.
P.SCAN: Hold to access Tuner option
menu, press again to cycle through
AUTO STORE & PRESET SCAN and
Press to select.
AUTO STORE: Store strongest
broadcast station in your area.
PRESET SCAN: Scan through
currently stored presets.
VOLUME: Press the VOLUME UP
button to increase volume. Press the
VOLUME DOWN button to
decrease volume.
TUNER/SEEK/TRACK: Press
button to tune frequency higher.
Press button to tune frequency
lower. Press and hold to scan to next
strongest station.
STATION STORE PRESETS:
Hold to
store current station.
Press once to recall stored channel.
NOTE: Up to 18 FM & 12 AM channels
can be stored.
P.SCAN
HDMI
MODE: Press to cycle source to
USB mode.
VOLUME: Press the VOLUME UP
button to increase volume.
Press the VOLUME DOWN
button to decrease volume.
RANDOM: Press to play all tracks
in random order. Press again for
normal playback.
PLAY/PAUSE: Press to PAUSE or
RESUME current audio.
REPEAT: Press consecutively to
cycle through (Track, Folder, all)
playback of tracks.
TUNER/SEEK/TRACK: Press
button to advance to NEXT TRACK.
Press button to advance to
PREVIOUS TRACK. Press & Hold to
fast forward/reverse seek through the
track.
FOLDER DOWN:
Press to go to
previous folder.
FOLDER UP:
Press to go to next folder.
USB:
Connect a USB flash/thumb drive
for audio playback.
JWM22
QUICK REFERENCE GUIDE

Jensen JWM22 Specifications

General

Brand	Jensen
Model	JWM22
Category	Stereo System
Language	English

Summary

Basic Operation Controls

Source Selection

Cycle through HDMI/AUX, BT/USB, and AM/FM audio sources.

Volume Adjustment

Increase or decrease audio volume using dedicated buttons.

Power and Dimmer Control

Turn device on/off, toggle dimmer, and enter standby.

Menu Navigation

Exit menus or access settings and audio adjustments.

Audio Settings

Adjust Bass, Treble, Balance, Fade, and Loudness.

Speaker Zone Control

Select output for Speaker Zone A and Speaker Zone B.

System Reset

Reset the device using a ballpoint pen or thin metal object.

AM;FM Tuner Operations

Tuner Source

Press to change source to radio mode.

Tuner Presets and Scan

Access tuner options, auto store, and scan presets.

Tuner Seek and Track

Tune frequency, scan for stations, or seek tracks.

Station Presets

Store and recall broadcast stations.

USB Media Playback

USB Source Mode

Select USB mode for audio playback.

Playback Controls

Play, pause, resume, random, and repeat track playback.

Track Navigation

Advance or reverse tracks, and fast forward/reverse seek.

Folder Navigation

Navigate through folders on the USB drive.

USB Device Connection

Connect a USB flash/thumb drive for audio playback.

Bluetooth Device Operation

Bluetooth Source Mode

Select BT mode for Bluetooth audio playback.

Pairing Bluetooth Devices

Initiate pairing and connect a Bluetooth device.

Bluetooth Track Control

Advance or reverse tracks and play/pause audio.

Call Handling

BT audio pauses automatically when a call is answered.

Bluetooth Settings

Access Bluetooth device list and pairing options.

Clock and Alarm Functions

Time Display

Toggle between clock display and song information.

Alarm and Timer Settings

Set alarm, sleep timer, and clock time.

Time Format Selection

Select between 12-hour or 24-hour clock format.

Exit Time Menu

Press BACK to exit the time menu.