Jensen JWM10A - User Manual

Other manuals for Jensen JWM10A

Quick Reference Guide2 pages

Need help?

Do you have a question about the Jensen JWM10A and is the answer not in the manual?

Summary

Introduction

Features of the JWM10 A

Lists key features of the JWM10A mobile audio system.

Safety Precautions

Outlines safety measures for power supply, service, moisture, cleaning, and accessories.

Installation Guide

Tools, Supplies, and Battery Disconnection

Lists installation tools, supplies, and safe battery handling procedures.

Mounting Location and Radio Installation

Guidance on choosing a mounting spot and steps for physically installing the unit.

Wiring Connections

Detailed Wiring Diagram and Pinout

Details the connections and pin assignments for proper unit operation.

Basic Operation

Power, Mode, and Volume Control

Instructions for turning the unit on/off, changing modes, and adjusting volume.

Audio Settings

Adjusting bass, treble, balance, and loudness for audio output.

System Settings

Adjusting LCD backlight, sleep timer, and alarm functions.

Bluetooth and Auxiliary Input

Enabling Bluetooth, setting PVOL, and connecting external audio sources.

Reset Function

Procedure to reset the unit to its factory default settings.

Tuner Operation

Band Selection, Manual Tuning, and Presets

Switching bands, tuning frequencies, and storing/recalling stations.

Automatic Station Scan

Auto-scanning for stations or scanning through stored presets.

Bluetooth Operation

Pairing and Connecting Bluetooth Devices

Steps to connect a Bluetooth-enabled device and manage pairings.

Bluetooth Audio Playback and Controls

Streaming audio and using playback controls like play/pause/skip.

jControl App Operation

App Features

Lists functions controlled by the jControl mobile application.

Connecting and Using jControl App

Guide to pairing a mobile device and using the jControl app.

The JWM10A is a mobile audio system designed by Jensen.

Function Description

The JWM10A is a mobile audio system that offers various functionalities for entertainment and control. It features a built-in AM/FM tuner with 30 preset stations (12 AM/18 FM). The unit is Bluetooth ready, supporting A2DP/AVRCP streaming audio, allowing users to connect and stream music from Bluetooth-enabled devices. It is also APP Ready, meaning it can be controlled via a dedicated mobile application. The system includes electronic bass, treble, balance, and fader controls for audio customization. A time/alarm clock function is integrated, along with a 1/8" front auxiliary audio input and rear audio RCA input for connecting external audio sources. The unit provides four speaker outputs, divided into two zones, allowing for flexible audio distribution.

Important Technical Specifications

Power Supply Requirements: DC12 Volts, Negative Ground
Operating Voltage: 10-16 VDC
Overall Dimensions: 10.4" (W) x 2.8" (H) x 3.6" (D)
Weight: 1.0 lbs. (0.39Kg)
FM Tuner Range: 87.5-107.9 Mhz
FM Sensitivity: <5 μV
FM Stereo Separation @ 1kHz: >30 dB
AM Tuner Range: 530-1710 kHz
AM Sensitivity: <30 μV
Amplifier Output Power per Channel: 4 x 6 Watts
Amplifier Output Impedance: Compatible with 4-8 ohms speakers, 4 ohm load minimum
Total System Power: 24 Watts Maximum
Bluetooth Technology: Short-range wireless radio protocol, 2.4 GHz range, transmits audio and data at speeds up to 2.1 Mbit/s over a range of up to 10 meters.

Usage Features

Basic Operation

Power/Mode: Press the POWER/MODE button to turn the unit on. Press and hold to enter standby mode. Cycle through available modes by pressing the button.
Volume Control: Use the VOLUME ▲/▼ buttons to increase or decrease the volume output. Press and hold for continuous adjustment.
Audio Menu Setting: Press the AUDIO/SETTING button to access audio adjustments like Bass (BAS), Treble (TRE), Balance (BAL), and Loudness (LOUD). Use VOLUME ▲/▼ to make adjustments.
System Menu Setting: Press and hold the AUDIO/SETTING button to enter system menu list. Press again to cycle through options like Liquid Crystal Display (LCD) Back Light (Dimmer), Sleep Mode, Alarm Setting, Bluetooth settings (BT ON/OFF, BT DEV, BT PAIR, Preset Volume), and Reset.
LCD Back Light: Adjust brightness from "BRI 9" (brightest) to "BRI 0" (off).
Sleep Mode: Set a sleep timer (0, 15, 30, 45, or 60 minutes) for automatic unit turn-off.
Alarm Setting: Turn the alarm ON/OFF. Adjust hour and minute using VOLUME ▲/▼ buttons.
Auxiliary Input Function: Connect portable audio devices via the 1/8" AUX IN connector on the front or RCA jacks on the rear. Select AUX 1/AUX 2 mode using the POWER/MODE button.
Zone Output: ZONE A and ZONE B buttons control speaker output for respective zones.

Tuner Operation

Select a Band: Press BAND/ENTER to switch between FM1, FM2, FM3, AM1, and AM2 bands.
Manual Tuning: Use the tune up (>>) or tune down (<<) buttons for single-step frequency adjustment. Press and hold to seek the next strong station.
Preset Stations: Six numbered preset buttons are available for storing and recalling stations.
- Store Preset Stations: Select a band and station, then hold a preset button for one second.
- Recall Preset Stations: Select a band, then momentarily press a preset button.
Automatically Store / Preset Scan (AS/PS):
- Automatically Store: Press and hold AS/PS for over one second to scan and store six strong stations for all bands.
- Preset Scan: Press AS/PS momentarily to scan all preset stations in the current band, playing each for five seconds.

Bluetooth Operation

Pairing a Bluetooth Device: Press and hold the PAIR button to initiate pairing. The unit will become discoverable as "JWM10A." Select JWM10A on your mobile device and enter "0000" if prompted.
Bluetooth Audio (A2DP): Stream audio from connected Bluetooth devices. The LCD will display "BT AUDIO" in BT mode.
Selecting Tracks: Use tune up (>>) or tune down (<<) buttons to navigate tracks.
Pausing Playback: Press the ►II button to pause/resume playback.
Bluetooth Menu Options: Access by pressing the PAIR button.
- Device List: View paired devices. Select a device and choose to connect/disconnect, lock/unlock, or delete it.
- Locked/Unlocked: Lock a device to prevent it from being removed from the list if more than 5 devices are used.
- Disconnect: Temporarily remove the BT link.
- Delete: Remove a device from the list.

APP Operation (Jensen Specialty Controller)

Functionality: The app transforms your mobile device into a remote control for the JWM10A, offering control over power, volume, mute, AM/FM tuner, Bluetooth streaming, auxiliary audio inputs (analog 1 & 2, digital coaxial, digital optical), speaker selection (A and/or B), audio menu controls (bass, treble, balance, volume, speaker selection), clock, sleep timer, and alarm. It also provides visual display feedback.
Connecting: After downloading and installing the jControl app, pair your device via Bluetooth. Once paired, open the app and use it as instructed in the jControl app manual (available at http://asaelectronics.com/manuals-guides).
Note for Android: Close the app before Bluetooth pairing to avoid connection errors.

Maintenance Features

Use Proper Power Supply: Designed for 12-volt DC, negative ground battery systems.
Use Authorized Service Centers: Do not attempt to disassemble or adjust the product yourself. Contact a professional for assistance.
Avoid Moisture: Do not expose the unit to rain or moisture to reduce fire/electric shock risk.
Avoid Cleaning Products: Clean the front of the unit with a slightly damp cloth. Do not use cleansers.
Use Recommended Accessories: Use only recommended accessories to reduce fire/electric shock and interference.
Reset: The RESET function (accessed via BAND/ENTER button in system menu) restores factory default settings. This function times out after 5 seconds of inactivity.
Battery Disconnection: Disconnect the negative battery cable prior to installation to prevent short circuits. Exercise caution if the vehicle has an on-board drive or navigation computer, as disconnecting the battery may result in data loss.