A B
P.SCAN
HDMI
Bluetooth Operation
MODE:
Press cycle source to BT
mode.
PAIR DEVICE VIA BLUETOOTH:
Make sure the device you intend to
pair with is on and Bluetooth is
enabled.
Press & hold to start the pairing
process. The display will show 'PAIR'
and be able to be paired with for 120
seconds. With your device in Bluetooth
settings, 'JWM22' should appear as an
available device. Tap 'JWM22' to
connect.
VOLUME: Press the VOLUME UP
button to increase volume. Press
the VOLUME DOWN button to
decrease volume.
SETTINGS: Press & hold to navigate
through menu options, Press to
select BT Device LIST or PAIR.
TUNER/SEEK/TRACK: Advance or
reverse tracks on your device.
PLAY/PAUSE: Press to PAUSE or
RESUME current audio.
ANSWERING PHONE:
BT audio will
automatically pause when a call is
answered. It will then resume once call
has ended. In some cases, it may be
necessary to press the play button to
resume the BT audio.
P.SCAN
HDMI
Clock With Alarm
TIME VIEW: Press to toggle clock
display or song information.
ALARM/SLEEP TIMER/TIME SET:
Hold to bring up time menu and press
again to cycle through the menu
options: ALARM (ON/OFF), ALARM
SET, SLEEP TIMER (OFF, 0, 15, 30,
45, 60 MINUTES), CLOCK SET.
Press button to adjust hour, press
button to adjust minutes either
clock or alarm time.
BACK: Press to exit time menu.
TIME (12H/24H): Hold to bring up
SETTING MENU and press repeatedly
to cycle through setting menus until
TIME (12/24) set reached.
Press and buttons to select 12
hours clock or 24 hours clock.
For owner’s manual, please visit http://www.asaelectronics.com/manuals-guides.
©Copyright 2019 ASA,LLC
QRG-JWM22
To Previous Page
Loading...
