NEXT TRACK: Press to play the next track. PAIR DEVICE VIA BLUETOOTH: (Make sure the device you intend to pair with is on and Bluetooth
is enabled.) While in Bluetooth mode, press and hold ENTER for 3 seconds to start the process.
The JWM9A will then display Pairing and be able to be paired with for 120 seconds. With your device
in Bluetooth settings, JWM9A should appear as an available device. Tap JWM9A to connect.
Enter the pairing password (0000), if requested. The BT AUDIO icon (
) will then be displayed.
||: Press to pause/resume.
||: Press to pause/resume.
RANDOM: Press to play all tracks in random
order. Press again for normal playback
REPEAT: Press consecutively to toggle repeat
(one, directory, all) playback of tracks
STOP: Press to stop playback.
FOLDER DOWN: Press to
move down in the folder list.
FOLDER UP: Press to move
up in the folder list.
NEXT TRACK: Press to play the next
track, press and hold to fast forward
seek through the track. In folder view,
press to move down in the f ile list.
PREV TR ACK: Press once to go
back to play the previous track;
press and hold to fast reverse seek
through the track. In folder view,
press to move up in the f ile list.
For owner’s manual, please visit http://www.asaelectronics.com/manuals-guides or scan this QR code.
QRG-JWM9A-0816
©Copyright 2016 ASA, LLC
PREV TRACK: Press
once to go back to the
beginning of the track,
and twice to play the
previous track.
SOURCE: Press repeatedly to cycle through available
modes until Bluetooth is reached, and press ENTER to select.
SOURCE: Press repeatedly to cycle through available
modes until USB is reached, and press ENTER to select.
TUNE/SEEK: Press to tune to previous | or next | station, press and hold to seek the next strongest station.
PRESETS 1-6: Press to recall preset Weatherband station.
SOURCE: Press repeatedly to cycle through available modes
until Weatherband is reached, and press ENTER to select.
JWM9A QRG-NO Apple.indd 2 8/9/2016 9:35:59 AM
To Previous Page
Loading...
