To Next PageTo Next Page
Need help?Do you have a question about the Jensen JMC-1000 and is the answer not in the manual?
Power| power requirement main unit | AC120V/60Hz |
|---|---|
| power consumption main unit | 40 Watts |
| remote control battery requirement | 2 X 1.5V 'AAA' (UM-4) size batteries |
Frequency Range| radio receiving AM range | 530 - 1710 kHz |
|---|---|
| radio receiving FM range | 88 - 108 MHz |
Section for recording model and serial numbers for ownership details.
Instructions for connecting the left and right speakers to the main unit.
Guidance on plugging the unit into a household AC power outlet.
Illustration and numbering of controls and indicators on the front panel.
Diagram of the main control panel with labeled buttons and displays.
Step-by-step instructions for installing batteries in the remote control.
Important safety guidelines regarding battery handling and disposal.
Explanation of basic controls like Preset Electronic Equalizer, Mute, and Balance.
Details on selecting FM modes and tape dubbing speeds.
Information on connecting headphones for private listening.
Guidance on optimizing AM and FM reception using antennas.
Steps for inserting up to three CDs into the carousel changer.
Steps to erase programmed track selections from the unit's memory.
How to set the unit to continuously replay a single selected track.
Instructions for setting the unit to continuously replay an entire CD.
Instructions for securing the turntable during transport using a transit screw.
Instructions for inserting and playing cassette tapes in the dual deck.
How to use fast forward and rewind functions for cassette tapes.
How to temporarily pause cassette playback without stopping the motors.
Guide for playing two cassette tapes back-to-back.
Information on cassette tape types, erase prevention tabs, and handling.
Tips for preventing tape jamming and tangling issues.
