How to fix a Jensen JMS32 Stereo System with no power?
If your Jensen Stereo System has no power, and it's connected to the vehicle accessory circuits, switch the ignition key to 'ACC' if the engine is off. Also, a blown fuse could be the issue; replace it with a 15 AMP ATO fuse.
What to do if my Jensen JMS32 Stereo System has no sound?
If your Jensen Stereo System has no sound, first, ensure the volume isn't set too low or muted; increase the volume if needed. Also, verify that the device is powered on. Finally, check if the unit is paused and press the play/pause button.
Why is my Jensen JMS32 not getting AM/FM reception?
If your Jensen Stereo System isn't getting any AM/FM reception, ensure the antenna cable is firmly inserted. Also, check that the device is powered on.
General| Brand | Jensen |
|---|---|
| Model | JMS32 |
| Category | Stereo System |
| Language | English |
Lists key features of the JMS32 marine stereo, including waterproof and corrosion resistance.
Details items included in the product package, such as the radio and mounting hardware.
States compliance with FCC rules and regulations for operation.
Advises on maintaining low volume for situational awareness while operating a vehicle.
Warns against submerging the unit to prevent electrical shorts and damage.
Advises avoiding high temperatures and engine compartment proximity.
Specifies the required 12V DC negative ground power supply for the unit.
Provides step-by-step instructions for physically mounting the radio unit in a dashboard.
Explains how to connect an external audio device using RCA cables.
Describes the line output for connecting the unit to an external amplifier.
Details connections for all front and rear speaker outputs, including positive and negative terminals.
Covers antenna, AUX, line out, USB, power, and remote connections.
Covers power on/off, volume adjustment, mute, mode selection, and display dimming.
Explains how to adjust audio settings like bass, treble, balance, and fader.
Describes accessing and adjusting system settings like Bluetooth pairing and region selection.
Details the procedure for restoring the unit to factory default settings.
Covers tuning modes, frequency tuning, seek, and preset station management.
Explains automatic station storage and preset scanning features for radio.
Instructions for connecting, disconnecting, and selecting tracks on a USB device.
Covers play/pause, track selection, and fast forward/reverse for USB media.
Configures track or album repeat playback options.
Enables random playback of all tracks.
Provides technical background on Bluetooth wireless connectivity.
Details available settings within the Bluetooth menu for device management.
Navigates through audio tracks during Bluetooth playback.
Controls pausing and resuming Bluetooth audio playback.
Solutions for the unit not turning on.
Troubleshooting steps for poor radio reception.
Solutions for no audio output from the unit.
Lists general technical specifications like frequency bands and power requirements.
Details FM tuner frequency range, sensitivity, and stereo separation.
Details AM tuner frequency range and sensitivity.
Provides amplifier output power and impedance details.
To Next Page
