4
1. Power On/Off / Phone Button
2. Power Indicator
3. Volume - / Skip Backward Button
4. Voulme + /Skip Forward Button
5. Bluetooth Button
6. Bluetooth Status Indicator
7. AUX-IN Jack
8. DC Input Jack
9. USB Charging Port
TURNING THE SMPS-665 POWER ON/OFF
1. In power off mode, press and hold the Power On/Off Button for 4-5 seconds to
turn the unit ON. The Power indicator goes on and the sound is heard.
2. To turn the unit OFF, press and hold the Power On/Off Button for 4-5 seconds
to turn the unit OFF. The Power and the Bluetooth status indicator both go off.
OPERATING THE UNIT
Pairing (linking) a Bluetooth enabled cell phone or other Bluetooth enabled
device to the speaker
1. If the SMPS-665 has never been paired with a Bluetooth device before. You need
to follow the pairing instructions below to link the SMPS-665 with your Bluetooth
device.
• Turn the SMPS-665 On. Press and hold the Bluetooth Button. A short
beep tone is heard and the Bluetooth Status Indicator will flash rapidly, the
SMPS-665 is now ready to pair (link) with your Bluetooth device.
• Turn on the Bluetooth function of your Bluetooth device and enable the search
To Next Page
Loading...
Need help?
General
