Jensen SP1790JK User Manual

SP1790JK
900MHz Wireless Indoor/Outdoor Speakers
User Manual
Page 1
INTRODUCTION
This 900 MHz digital hybrid wireless speaker system uses the latest wireless
technology that enables you to enjoy music and TV sound anywhere inside or
outside your home. You simply connect the system to any audio source such as
Radio, TV, VCR, Hi-Fi, and CD/MP3/VCD/DVD/Blu-Ray player. Without any
complicated wiring and installation, this system enables you to enjoy incredible
bona fide sound in minutes.
FEATURES
1. Weatherproof indoor and outdoor speakers
2. Automatic Phase Lock Loop (PLL) scanning system on speaker receivers
3. Phase Lock Loop (PLL) transmission system on transmitter
4. 900 MHz Digital Hybrid RF technology speaker system
5. Operating distance up to 150 feet
6. Virtually interference free audio quality
7. Standby Mode
8. Wireless remote control unit: Independently controls each speaker
A. Volume up/down
B. Power Off
9. Wall mountable using included mounting gaps on back of speakers.
10. 2-way speakers
IMPORTANT SAFETY INFORMATION
1. Read and follow all instructions and warnings.
2. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. If
necessary use a mild soap.

Jensen SP1790JK Specifications

General

Brand	Jensen
Model	SP1790JK
Category	Speakers
Language	English

Summary

Product Overview and Safety

Key Features

Highlights 900 MHz wireless technology, 150ft range, remote control, and weatherproof design.

Important Safety Information

Crucial instructions for safe operation, cleaning, and warnings to prevent damage or injury.

Component Identification and Installation

Transmitter Components

Identifies the antenna, signal indicator, and power indicator on the transmitter unit.

Speaker Receiver Controls

Details the Auto Tune, Volume, and Power ON/OFF buttons on the speaker units.

Remote Control Functions

Outlines the Auto Tune, Power/Standby, and Volume controls on the remote unit.

Transmitter Installation

Step-by-step guide for connecting the transmitter's antenna and AC power adapter.

Speaker Receiver Installation

Instructions for inserting batteries or connecting the AC adapter to the speaker units.

Operation and Connectivity

Remote Control Unit Setup

Guide for inserting batteries into the remote and its operational capabilities.

Connecting to Media Device

Explains how to connect the transmitter to various audio sources like TV, PC, or MP3 players.

System Operation

Steps for turning on the system, selecting channels, tuning, and adjusting volume.

Standby Mode and Auto Power Off

Details how the transmitter and speakers enter standby and automatically power off.

Troubleshooting and Specifications

Troubleshooting No Sound

Addresses issues like adapter connection, speaker power, battery, and volume settings.

Troubleshooting Distorted Sound

Provides solutions for distorted audio, including auto-tune, channel selection, and distance.

Technical Specifications

Lists key technical details such as transmission mode, frequency, voltage, and power output.

FCC Compliance and Warnings

Information regarding FCC rules, potential interference, and user's responsibility.