9
VM9214BT
OPERATING INSTRUCTIONS
Power On / Off
Press the /SRC button (10) on the unit to turn the unit on. The buttons on the
front of the unit light up and the current mode status appears in the LCD (7).
You can also turn on the unit by pressing the OPEN button (1) and opening the
TFT screen.
Press and hold the button to power off the unit.The monitor is drawn back
into the main compartment.
Audible Beep Confirmation
An audible beep tone confirms each function selection. The Beep tone can be
disabled through the Setup menu.
Mute/Line Mute
Press the rotary encoder MUTE button (11) on the front panel to mute the
volume from the unit. Press the rotary encoder button again to restore the
volume. “MUTE” is displayed on the LCD. Adjusting the volume or using any of
the audio setup features cancels the mute function.
If the “MUTE” wire is connected, audio output mutes when a telephone call is
received by the car phone or when verbal navigation is performed (using
optional NAV102).
Playing Source Selection
When the monitor is closed, press the SRC button (4) to change between
available audio playing sources in the following order: RADIO, DISC, USB1,
USB2, BT, NAV, AUX and CAMERA.
To Next Page
Loading...
Need help?
General
