38
VM9214BT
iPod
®
OPERATION
NOTE: Be sure your iPod has the latest Apple firmware installed to avoid
connectivity issues.
Accessing iPod Mode
This unit is Made for iPod
®
and iPhone
®
. You can control your iPod via touch
screen to access Playlist, Artist, Album, Songs, etc. Supported models
include, but are not limited to, the following:
• iPhone 4
• iPod nano 6G
• iPod touch 4G
• iPod classic
Accessing iPod Mode
The unit will automatically switch to iPod mode when an iPod or iPhone is
plugged into the front or rear USB connector.
NOTE: For basic iPod connectivity, you can use the white 30-pin to USB
iPod cable that came with your Apple device . For iPod video or photo
playback, you must purchase the jLink-USB cable.
To return to the iPod menu from any other source menu, press the SRC button
(10) on the front panel until the iPod menu appears on the screen, or choose
the iPod1 or iPod2 icon from the “SOURCE MENU” (only available when an
iPod or iPhone is connected to the USB1 or USB2 connector).
To Next Page
Loading...
