4
VM9214BT
CONTROLS AND INDICATORS
1. CLOSE/OPEN
Press to activate the automatic mechanical system and move the TFT monitor
into viewing position. Press again to close the TFT.
2. PIC/BAND
Press to adjust the Brightness and Contrast (see “Image/Display Settings” on
page 7).
With the monitor closed, press BAND to change between three FM and two
AM bands.
3. DISC SLOT
4. NAV/WIDE/ |
With the monitor closed, press to seek backward.
When the NAV102 is connected to the VM9214BT, press to display the
navigation user interface. The TFT screen must be open for this function to
operate.
Press and hold to adjust the display aspect of the picture to one of two
settings: Full, Normal or STANDBY.
5. TILT / |
Press to activate the tilt function. Use the rotary encoder to make adjustments
while the blue tilt icon is flashing.
With the monitor closed, press to seek forward.
6. EJECT
Press to eject a disc.
Press and hold to reset core mechanism position.
7. LCD Display
8. DISP
With the monitor closed, press to view alternate LCD display information.
9. TFT Display
10. SRC
Press to turn the unit on. Press and hold to turn the unit off.
When on, press once to select playing mode.
11. Rotary Encoder
Rotate to adjust the volume. While in the audio menu, press and release to
enter and/or confirm audio settings.
Press to activate the MUTE function and silence the receiver. Press again to
resume sound.
To Next Page
Loading...
Need help?
General
