Jensen VM9224 User Manual (English)

Other manuals for Jensen VM9224

Questions and Answers:

A
Andrea BentonAug 19, 2025
What to do if my Jensen Car Receiver disc does not play back?
- J
  John WestAug 19, 2025
  If your disc isn't playing back, several factors could be at play. Ensure the disc is in good condition, not warped or scratched. If it's dirty or wet, clean it gently with a soft cloth. A dirty laser pickup might also be the culprit, so try cleaning it with a cleaning disc. Confirm that you're using a compatible disc and that the disc's region code matches the unit. Also, check that the disc isn't inserted upside down, and that the parental lock settings are appropriate for the disc rating.
M
michaelsmithAug 21, 2025
What to do if interruption occurred during playback on Jensen VM9224?
- A
  Anna MonroeAug 21, 2025
  An interruption during playback might occur if the disc is dirty or scratched; in this case, clean the disc or replace it. It may also be caused by a damaged file or bad recording, so try recreating the disc with good files.
B
brooke52Aug 25, 2025
What to do if my Jensen Car Receiver says 'No Disc'?
- L
  Lori DonovanAug 25, 2025
  If the unit displays 'No Disc', ensure that a disc is present in the loading compartment. If it is, make sure the disc isn't dirty; clean it with a soft cloth if needed. Also, check that the disc is inserted correctly, with the label side up.
S
Stephanie AndersonAug 26, 2025
What to do if my Jensen Car Receiver displays 'Bad Disc' error?
- M
  melissa01Aug 26, 2025
  If you're getting a 'Bad Disc' error, it could be that the disc is dirty. Try cleaning it with a soft cloth. Also, ensure that the disc is inserted with the label side up.
H
Heather SingletonAug 27, 2025
How to fix weak station searching on Jensen VM9224 Car Receiver?
- R
  rgeorgeAug 28, 2025
  If you're experiencing weak station searching, check that the auto antenna is fully extended and properly connected by ensuring the auto antenna control cable is correctly connected. Also, verify that the LOCAL function is turned off.
R
Robin EllisAug 30, 2025
What to do if I cannot insert a disc into my Jensen VM9224?
- A
  Alexis TylerAug 30, 2025
  If you can't insert a disc, it might be because there's already a disc inside the unit. Eject the current disc before trying to insert a new one.
D
davidwhiteSep 1, 2025
Why is there no repeat or searching while playing VCD on Jensen VM9224?
- C
  Colleen EverettSep 1, 2025
  If there's no repeat or searching function available while playing a VCD, it might be because PCB is turned on. Try turning PCB off.
P
Patricia RichardsSep 3, 2025
What to do if my Jensen Car Receiver shows 'Error'?
- C
  cmartinSep 3, 2025
  If the unit displays 'Error', it may indicate an illegal mechanism operation. Try pressing the EJECT key for 5 seconds to reset the loading mechanism.
S
shirley54Sep 5, 2025
What to do if my Jensen VM9224 Car Receiver says 'Bad Disc'?
- C
  Claire YoungSep 5, 2025
  If your Jensen Car Receiver displays 'Bad Disc', it could be because: * The disc is dirty: Clean the disc with a soft cloth. * The disc is upside down: Insert the disc with the label side up.
P
pdillonSep 7, 2025
What to do if my Jensen VM9224 Car Receiver has interruption occurred during playback?
- A
  Andre HollandSep 7, 2025
  If interruption occurred during playback on your Jensen Car Receiver, it might be due to: * The disc being dirty or scratched: Clean the disc or replace it. * The file being damaged or a bad recording: Recreate the disc with good files.

Jensen VM9224 Specifications

General

Display	Yes
Screen Size	6.2 Inches
Display Size	6.2 Inches
Display Resolution	800 x 480 Pixels
Touchscreen	Yes
Bluetooth	Yes
USB Port	Yes
USB Input	Yes
Audio Formats Supported	MP3, WMA, AAC
Power Output	50W x 4
Radio Tuner	AM/FM
Rear Camera Input	Yes
DVD Player	Yes
SD Card Slot	Yes
Navigation	No
SiriusXM Ready	No
AUX Input	Yes
AM/FM Radio	Yes
GPS Navigation	No
Backup Camera Input	Yes
Steering Wheel Control Compatible	Yes
Remote Control	Yes
Video Formats Supported	MPEG-1, MPEG-2, MPEG-4, AVI