Jensen VX3020 - Installation Guide Manual

VX3020
Installation Guide
6.2” Double DIN Multimedia Receiver
What’s in the Box
The following items are supplied with
the VX3020:
• VX3020HeadUnit
• TrimRing
• HardwareBag
• Power/SpeakerOutputHarness
• RemoteControl
• ExternalMicrophone
• OwnersManual&WarrantyCard
• InstallationGuide
Tools and Supplies
The following tools and supplies are
needed to install the VX3020:
• Torx type, at-head and Philips
screwdrivers
• Wire cutters and strippers
• Tools to remove existing radio (screw
driver, socket wrench set or other
tools)
• Electrical tape
• Crimping tool
• Volt meter/test light
• Crimp connections
• 18 gauge wire for power connections
• 16 – 18 gauge speaker wire
WARNING!Neverinstallthisunitwhereoperationandviewingcouldinterferewith
safedrivingconditions.
INSTALLATION GUIDE
128-9279 VX3020 Installation Guide 01-31-14.indd 1 1/31/2014 2:38:34 PM