EasyManua.ls Logo

Jensen VX4022A - User Manual

Jensen VX4022A
4 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
VX4022A
Installation Guide
WARNING! Never install this unit where operation and viewing could interfere with
safe driving conditions.
What’s in the Box
The following items are supplied
with the VX4022A:
•
VX
4022A Head Unit
•
Trim Rings
• Hardware Bag
• Power/Speaker Output Harness
• Remote Control
• External Microphone
•
Installation Guide / Warranty
Tools and Supplies
The following tools and supplies
are needed to install the
VX4022A:
at-head and Philips
screwdrivers
• Wire cutters and strippers
• Tools to remove existing radio (screw
driver, socket wrench set or other
tools)
• Electrical tape
• Crimping tool
• Volt meter/test light
• Crimp connections
• 18 gauge wire for power connections
• 16 – 18 gauge speaker wire
•
Mounting Sleeve / Side Brackets

Questions and Answers

  • M
    Marco RobersonAug 2, 2025
    Why is there no audio output from my Jensen VX4022A Receiver?
    • G
      George ShannonAug 2, 2025
      If you're experiencing no or low audio output from your Jensen Receiver, there are several potential causes. It could be due to an improper audio output connection, so check your wiring. The volume might be set too low, so increase the volume level. Also, check the “MUTE” connection. Damaged speakers can also cause this issue, so consider replacing them. Heavily biased volume balance or speaker wiring in contact with the car's metal parts can also lead to this problem. Adjust the channel balance to the center position and insulate all speaker wiring connections.
  • A
    Alex HornAug 10, 2025
    How to fix a Jensen Receiver that will not power on?
    • B
      Brooke ThomasAug 10, 2025
      If your Jensen Receiver isn't powering on, the issue might be related to a blown fuse. Check both the radio fuse and the car battery fuse, and install new fuses with the correct rating if necessary. Alternatively, an illegal operation might have occurred. In this case, press the RESET button located in the middle of the left side of the front panel.
  • A
    Andres NielsenAug 16, 2025
    What to do if my Jensen VX4022A has poor sound quality?
    • J
      Julie WyattAug 16, 2025
      If you're experiencing poor sound quality or distortion with your Jensen Receiver, consider these possibilities: You might be using a pirated disc, in which case you should use an original copy. The speaker power rating might not be compatible with the unit, so connect proper speakers. The speaker could also be shorted; check the speaker contact.
  • W
    William NavarroAug 25, 2025
    Why does my Jensen Receiver keep resetting when the engine is off?
    • V
      Victoria WilkinsonAug 25, 2025
      If your Jensen Receiver resets itself when the engine is off, the most likely cause is an incorrect connection between the ACC and the positive battery wire. Check the wiring and correct it.

Jensen VX4022A Specifications

General IconGeneral
DisplayYes
BluetoothYes
USB PortYes
AUX InputYes
Radio TunerAM/FM
TouchscreenYes
DVD PlayerNo
SD Card InputYes
Rear View Camera InputYes
Steering Wheel Control CompatibleYes
Preamp OutputsYes
Remote ControlYes
Power Output50 Watts x 4
Compatible FormatsMP3/WMA
Peak Power Output4 x 45 Watts

Related product manuals