Jensen VX7021 User Manual (English)

Questions and Answers:

S
Sonya LutzAug 20, 2025
Why is there no sound coming from my Jensen VX7021 Receiver?
- J
  John JohnsonAug 20, 2025
  There could be several reasons for the lack of audio output from your Jensen Receiver. Check the following: * Ensure the audio output connections are properly wired. * Increase the volume level. * Verify the “MUTE” connection is correctly wired. * Inspect speakers for damage; replace if necessary. * Adjust the channel balance to the center position if heavily biased. * Make sure speaker wiring is not in contact with any metal parts of the car; insulate if needed.
P
Peter ThomasAug 22, 2025
How to fix a Jensen Receiver that won't turn on?
- M
  michaelturnerAug 22, 2025
  If your Jensen Receiver is not powering on, the issue might be related to a blown fuse or an illegal operation. Check the following: * Replace any open radio fuses with new fuses of the correct rating. * Replace any open car battery fuses with new fuses of the correct rating. * If the unit experienced an illegal operation, press the RESET button located in the middle of the left side of the front panel.
L
lrobinsonAug 25, 2025
How to improve weak radio station searching on my Jensen Receiver?
- C
  Christopher StaffordAug 25, 2025
  If your Jensen Receiver is having trouble finding radio stations, the issue might be with the antenna or the LOCAL function. Check these possible causes: * Ensure the auto antenna is fully extended, or connect the auto antenna control cable properly. * Make sure the LOCAL function is turned off.
B
Brandon BowmanAug 26, 2025
What to do if my Jensen VX7021 Receiver disc does not play back?
- A
  ashleymoralesAug 26, 2025
  If your Jensen Receiver is not playing discs, there could be several reasons. Here’s what to check: * Make sure the disc is in good condition (not warped or scratched). * Clean the disc with a soft cloth if it's dirty or wet. * Clean the laser pickup with a cleaning disc if it is dirty. * Confirm you are using a compatible disc. * Adjust the Parental Lock settings to a lower restriction if the disc rating exceeds the current limit. * Use a disc with the proper region code. * Ensure the disc is inserted with the label side up.
Y
ystoneAug 27, 2025
Why does my Jensen VX7021 have poor sound quality?
- B
  Bernard FlemingAug 28, 2025
  Poor sound quality or distortion from your Jensen Receiver could be due to several factors: * If you are using a pirated disc, use an original copy instead. * Ensure that the speaker power rating is compatible with the unit; connect proper speakers. * Check the speaker contact to make sure the speaker is not shorted.
E
Erik JohnsonAug 30, 2025
Why is there no image on my Jensen VX7021 Receiver screen?
- J
  Jeffrey GonzalezAug 30, 2025
  If there is no image on your Jensen Receiver screen, the issue might be related to the parking brake wire or parking brake engagement. Check the following: * Ensure the parking brake wire is correctly connected. * Make sure the parking brake is engaged by stopping the vehicle in a safe place and applying the parking brake.
R
Robert BoyerSep 1, 2025
Why does my Jensen VX7021 Receiver keep resetting when the engine is off?
- B
  Brandon ThomasSep 1, 2025
  If your Jensen Receiver resets itself when the engine is off, it might be due to an incorrect connection between the ACC and positive battery wire. Check the wiring and correct it.
J
Jeffrey BowersSep 3, 2025
What causes flashing image or interference on my Jensen Receiver screen?
- T
  Tamara CollinsSep 3, 2025
  A flashing image or interference on your Jensen Receiver screen can be caused by: * Using a DVD that is not compatible with the current TV system settings; change the setup to accommodate the disc. * Improper video signal connections; check the wiring and correct it.
M
mariavalenciaSep 5, 2025
Why does playback get interrupted on my Jensen VX7021 Receiver?
- A
  Amy RyanSep 5, 2025
  If playback is interrupted on your Jensen Receiver, it could be due to: * A dirty or scratched disc; clean or replace the disc. * A damaged file or bad recording; recreate the disc with good files.
S
Sydney HatfieldSep 7, 2025
Why is the image on my Jensen Receiver blurred, distorted, or dark?
- A
  April SmithSep 7, 2025
  If the image on your Jensen Receiver is blurred, distorted, or dark, it might be because you are using an illegally copied disc. Use an original disc instead.