Need help?Do you have a question about the Jensen JHD910 and is the answer not in the manual?
General| power supply requirements | DC 12 Volts, Negative Ground |
|---|---|
| chassis dimensions | 131.6 (W) x 47.5 (D) x 86 (H) |
| loading impedance | 4 - 8 ohms per channel |
Tone Controls| bass control | ±10 dB at 100 Hz |
|---|---|
| treble control | ±10 dB at 10 kHz |
| current drain | 1.5 Ampere (max) |
FM Tuner| tuning range | 87.5-108.0 MHz |
|---|---|
| FM mono sensitivity | 1.5uV |
| stereo separation at 1 kHz | >25dB |
AM Tuner| tuning range | 522-1710 kHz |
|---|---|
| sensitivity | <30uV |
| weather band sensitivity | <1uV |
Amplifier| total system power | 15 Watts Maximum |
|---|---|
| signal to noise ratio | >70dB |
| loading impedance | 4 - 8 ohms per channel |
Instructions for mounting the radio bracket using different screw options.
Steps to secure the radio to the mounted bracket or panel.
Methods for mounting the headphone bracket using screws or tape.
Turning the unit on/off and checking software version.
Silencing audio output and its behavior when the unit is turned on/off.
Switching the LCD between function mode and clock display.
Connecting external audio devices and using the timer function.
Adjusting volume levels and setting the current time.
Adjusting audio features and system menu options like brightness.
Switching between AM/FM bands and manual/seek tuning methods.
Storing and recalling radio stations using preset buttons.
Guide to accessing the weather band and understanding NOAA broadcasts.
Functionality and settings for weather alert notifications.
To Next Page
