5.3 The calculated route is not optimal
Issue: The planned route is too long or includes several minor roads.
Cause: In
, the route planning method is not set to the optimal parameter.
Solution: Select your preferred route planning method by performing the following steps:
1. T
ap
, , and .
2. T
ap
and select your preferred route, for example or
. See Page 77.
5.4 Disabling the speed limit warning
Issue: The speed limit warning is signalling even when the actual speed limit is kept.
Cause: The speed limit in the digital map data might differ from the actual speed limit of your current
location.
Solution: Disable the speed warning by performing the following steps:
1. T
ap
, , and . .
2. T
ap
, and .
87
To Next Page
Loading...
