To Next PageTo Next PageWhat does 'Bad Disc' mean on Jensen VX6020 Car Receiver?
If the Jensen Car Receiver displays 'Bad Disc', the disc might be dirty or inserted upside down. Clean the disc with a soft cloth and ensure it is inserted with the label side up.
Why does my Jensen Car Receiver resets itself when the engine is off?
If the Jensen Car Receiver unit resets itself when the engine is off, the connection between the ACC and positive battery wire may be incorrect. Check the wiring and correct it.
How to fix prolonged image on Jensen VX6020 Car Receiver?
If your Jensen Car Receiver displays a prolonged image or an improper height/width ratio, the aspect ratio setup may be incorrect. Use the correct aspect ratio setting.
Why is the image blurred on my Jensen VX6020 Car Receiver?
If the image on your Jensen Car Receiver is blurred, distorted, or dark, it may be because the disc is illegally copied. Use an original disc.
What to do if there is no image on Jensen VX6020?
If your Jensen Car Receiver shows no image, check the connection to the parking brake wire and correct it if necessary. Also, ensure that the parking brake is engaged by stopping the vehicle in a safe place and applying the parking brake.
How to fix poor sound quality on Jensen VX6020 Car Receiver?
If you are experiencing poor sound quality or distortion with your Jensen Car Receiver, make sure you are not using a pirated disc; use an original copy. Also, ensure that the speaker power rating is compatible with the unit and check the speaker contact for any shorts.
What to do if flashing image or interference appears on Jensen Car Receiver screen?
If the image on your Jensen Car Receiver is flashing or interference appears on the screen, the DVD may not be compatible with the current TV system settings; change the setup to accommodate the disc. Additionally, check the video signal connections to ensure they are properly wired.
How to improve weak station searching on Jensen Car Receiver?
If you are experiencing weak station searching on your Jensen Car Receiver, try the following: 1. Fully extend the auto antenna or properly connect the auto antenna control cable. 2. Ensure the auto antenna is properly connected. 3. Turn off the LOCAL function.
What to do if there is no audio output from Jensen VX6020?
If you are experiencing no or low audio output from your Jensen Car Receiver, there are several things to check: 1. Ensure the audio output connection is properly wired. 2. Increase the volume level. 3. Review the wiring diagram to check the “MUTE” connection. 4. Replace any damaged speakers. 5. Adjust the channel balance to the center position if it's heavily biased. 6. Insulate all speaker wiring connections to prevent contact with metal parts of the car.
Why my Jensen Car Receiver unit will not power on?
If your Jensen Car Receiver unit will not power on, there are several potential causes. First, check the radio fuse and the car battery fuse; if either is open, install a new fuse with the correct rating. Second, the unit may be in illegal operation, in that case press the RESET button located in the middle of the left side of the front panel.
General| Resolution | 800 x 480 |
|---|---|
| Bluetooth | Yes |
| USB Ports | 1 |
| Radio Tuner | AM/FM |
| Compatible Audio Formats | MP3, WMA |
| Rear Camera Input | Yes |
| SD Card Input | Yes |
| DVD Player | Yes |
| Steering Wheel Control Compatible | Yes |
| Aux Input | Yes |
| Video Playback | Yes |
| Display | 6.2 inch LCD |
| Supported Video Formats | AVI |
| Equalizer | Built-in |
