Need help?Do you have a question about the Jensen XA4150 and is the answer not in the manual?
Power Output| power output (4 ohms) | 75 Watts per channel RMS |
|---|---|
| power output (2 ohms) | 100 Watts per channel RMS |
| power output (4 ohms bridged) | 200 Watts per channel RMS |
Audio Specifications| frequency response | 20 Hz-20 kHz ± 3 dB |
|---|---|
| signal to noise ratio | >100 dB |
| channel separation | >65 dB, 1 kHz |
Impedance and Crossover| speaker impedance | 2-8 ohms |
|---|---|
| input impedance | 20 k ohms |
| crossover frequencies | Low-High: 50-250 Hz |
Power Requirements| power requirement | 14.4 VDC (10.8-15.6 VDC allowable) |
|---|---|
| fuse requirements | two 25 amp blade-type fuses |
Dimensions| dimensions | 2.25" x 11.125" x 12.75" |
|---|---|
| dimensions (metric) | 56.5mm x 282mm x 330mm |
To Next Page
