Super User Mode Jester Operating Manual
Jester Manual 73-403-00 Issue 3.2 35 of 52
Help Language
The <Help Language> menu allows different languages to be selected for the Online
Help. Use the cursor keys to select <Help Language>, and press ENTER. Now
press ENTER and use the up or down cursor keys to select the required language
(English, Deutsch, Francais or Nederlands). Other languages may be added in
future software updates. Once the option you wish is showing, press ENTER, then
move to <OK> and press ENTER again.
Test Mode
This option is provided primarily for factory and dealer servicing only. It allows the
hardware of the Jester to be tested in isolation from setup options or programming in
the show data, which can be useful in diagnosing some problems.
• Pressing a button will display it’s name on the Main LCD, optionally toggle nearby
LEDs, and optionally display the level of a nearby fader.
• The DMX Input and Output ports will be tested (this test may fail if a DMX-Input
source is present).
• Shaded colour bar patterns are displayed on the monitor output.
• MIDI test messages are transmitted if MIDI is enabled.
Press ENTER to leave test mode and return to the Super User menu.
To Next Page
Loading...
Need help?
General