Glossary Jester Operating Manual
Jester Manual 73-403-00 Issue 3.2 43 of 52
Group
The ability to combine several auxiliary buttons to control a single DMX device with
several different on/off levels. This allows you to control colour scrollers via setting
each colour up on a different auxiliary button.
Help
To obtain the Online Help for the Jester, press SHIFT, LEFT and RIGHT at the same
time. The language can be changed in Super User.
HTP
Highest Takes Precedence. The mixing method used on the Jester, where activating
a submaster on top of a memory will result in additive mixing.
IEC320-C14
The type of mains input connector on the inline PSU, sometimes shortened to simply
IEC, or referred to as a kettle plug.
Insert
The button on the Jester which is used to add a memory between two scenes, or to
add another step to a chase.
Intensity
How bright a light is. Also known as Dimmer.
Jack
The connector used for the Audio In and Remote connectors on the Jester. The Jack
used on the Jester is the ¼ inch, stereo variety.
Jester
The lighting control desk which you have infront of you.
Key
Another name for a Button.
Law
The curve of the dimmer, which is normally set on the dimmer itself. The Jester does
not allow you to control the fade law.
LCD
Liquid Crystal Display, the area above the PROGRAM/GO button which displays
basic cue information.
LED
Light Emitting Diode. A small electrical component which emits light when a current
is passed through it in a particular direction. These are used on the Jester
underneath the buttons, to indicate selections or presses.
To Next Page
Loading...
Need help?
General