Jester Operating Manual Glossary
48 of 52 Jester Manual 73-403-00 Issue 3.2
primarily 3-pin (used for Audio and some cheap DMX devices), 4-pin (used for power
and colour scrollers) and 5-pin (used for DMX devices). Note that you should never
connect a device with a 4 pin XLR to any other device unless they were built to be
used together. Different manufacturers use different voltages on these pins, and
misuse could result in damage to one or both devices.
Yellow
The colour of the PROGRAM/GO button when the desk is in PRESET mode.
Zero 88
The manufacturer of the Jester.
To Next Page
Loading...