1 888 275 4538 MVP GROUP .14 | P a g e
Fig.12
2- Open main water supply valve.
3- Switch on electricity at the breaker panel.
4- Close the door and press button “H” to turn ON the machine. (Fig.13)
Fig.13
- During water filling process is displayed “FILL”. (Fig.14)
Fig.14
- If during this process the door is opened, the display will show “CLOSE DOOR”. Consequently close the
door.
- During filling and water heating process the Button “D” indicator will show the color AMBER.
- After water heating process is finished and the temperature is reached, the button “D” START button light
will display the color GREEN and the machine is READY to use.
3B2 – DETERGENT FILLING PROCESS (versions without automatic detergent pump only)
Dishwasher Models:
- Begin filling the tank with 5 to 6 spoons detergent (24 ml) and 1 spoon (5ml) every 2 to 3 wash cycles.
N.B.
To Next Page
Loading...
