What to do if my Jet-tech F-22 will not operate or start?
If your dishwasher won't start, first check if the Power ON Indicator Lamp is off. If it is, verify the breaker and all electrical connections. If the Power ON Indicator Lamp is on, make sure that the water supply is turned on.
Covers warranty period, conditions, and limitations for Jet Tech warewashers.
Guides users through the initial power-on, water fill, and heating processes.
Explains the electrical flow from power-on through heating to the ready state.
Details the electrical components and sequence for wash and rinse cycles.
Provides instructions on identifying and adjusting wash and booster thermostats for correct temperatures.
Explains the role of the air pressure switch in water level regulation.
Details the procedure for adjusting the air pressure switch to set water levels.
Guides on adjusting the amount of rinse additive dispensed by the pump.
Explains how to adjust the rate at which the liquid detergent pump dispenses.
Describes the function of the drain pump and models equipped with it.
Explains how to adjust the timing and duration of detergent injection pulses.
Instructions for replacing the water inlet valve, including specific notes for certain models.
Addresses problems related to dirty dishes, poor rinsing, and foreign material.
Covers issues preventing the machine from starting or operating correctly.
General| Brand | Jet-tech |
|---|---|
| Model | F-22 |
| Category | Dishwasher |
| Language | English |
To Next Page
