Electrical
7
Installation
This dishwasher must be installed on a level, rigid, non-
flammable surface
. Ensure that the machine is level by installing
the feet (shipped in the wash tank of the machine) and
adjusting them. Be sure to provide adequate space for
water, drain and electrical connections.
(i.e.:ceramic tiles, concrete, sheet
metal, etc)
The dishwasher must be connected with 120 volts 60Hz line.
Unit must be well grounded. Breaker rating should be 15
amps.
Counter
Non-Combustible Material
The cord and plug on this unit must not be modified or tempered.
To Next Page
Loading...
