To Next PageTo Next Page
Need help?Do you have a question about the Jet 22-44 Pro and is the answer not in the manual?
General| Maximum Board Width | 44" |
|---|---|
| Dust Port Diameter | 4" |
| Type | Drum Sander |
| Voltage | 230V |
| Table Size | 22" x 44" |
Explanation of the limited warranty provided for JET products based on product type.
Defines the scope of warranty coverage, including defects in workmanship and materials.
Lists exclusions from warranty, such as misuse, wear, and commercial use of WW products.
Provides instructions on how to obtain service or repair for the product.
Outlines limitations on implied warranties and liability for damages.
Procedure for attaching the stand legs to the drum sander columns.
Instructions for adjusting table support set screws for proper alignment.
Steps for installing the conveyor table onto the sander stand.
Procedures for ensuring the drum sander is properly leveled for optimal performance.
Explanation of how to adjust the table height using the handwheel.
Explanation of how to set the correct depth of cut for sanding.
Guidance on choosing the optimal feed rate for sanding performance.
