Jet BD-920N - Lubrication Schedule

Lubrication Schedule
Note: lubricate all locations daily.
Grease refers to #2 tube grease.
Oil refers to 20W machine oil.
1 . 1-2 squirts oil into oil ball on gear hub.
2. Grease teeth of feed and change gears
1-2 squirts oil into oil ball on gear hub.
3 Lightly coat gear teeth with oil.
1-2 squirts oil into oil ball on gear hub
4 Wipe bedways clean and coat lightly with oil.
5. Grease rack over complete length
6. Clean and oil leadscrew over complete length.
7. 1-2 squirts oil into oil ball on leadscrew bracket
8. Lightly coat screw and guides of top slide with oil.
9 1-2 squirts oil into oil ball on top of tailstock body.
10. 1-2 squirts oil into oil ball on top of carriage.
11. 1-2 squirts oil into four oil reservoirs on gear box.
12 1-2 squirts oil into hub for feed lever.
13 1-2 squirts oil into two oil balls on apron front
17