Jet BDB-1340A - User Manual

Operation and Maintenance Instructions
Belt Drive Bench Lathe, 13x40-inch
Model BDB-1340A
(shown with optional 321443AK stand)
For Parts List and Electrical Diagrams, see document M-321357A
JET
427 New Sanford Road
LaVergne, Tennessee 37086 Part No. M-321360A
Ph.: 800-274-6848 Revision H 05/2016
www.jettools.com Copyright © 2014 JET

Jet BDB-1340A Specifications

General

Motor Power	2 HP
Swing Over Bed	13 inches
Distance Between Centers	40 in
Tailstock Taper	3 MT
Motor	2 HP, 230V, 1-Phase

Summary

Warranty and Service

How to Get Technical Support

Instructions for obtaining technical support and service.

General Safety Warnings

Specifications

Uncrating and Clean-Up

Chuck Preparation

Lubrication

Electrical Connections

Controls

Main On-Off Switch

Controls power to the lathe.

Adjustments

Break-In Procedure

Steps for initial break-in of machine parts.

Speed Selection

How to change spindle speeds using belt adjustments.

Change Gear Replacement

Thread Cutting

Saddle Adjustment

Cross Slide Adjustment

Compound Rest Adjustment

Headstock Alignment

Replacement Parts

Electrical Schematic - BDB-1340 A