Need help?Do you have a question about the Jet JPM-13CS and is the answer not in the manual?
General| Cutterhead Speed | 10, 000 RPM |
|---|---|
| Number of Knives | 3 |
| No-load Speed | 10, 000 RPM |
| Maximum Cutting Width | 330 mm |
| Maximum Depth of Cut | 1/8 inch |
| Maximum Thickness | 6 inches |
| Max Planing Width | 330 mm |
| Max Planing Depth | 1/8 inch |
Specifies limitations on implied warranties and liability for damages.
Covers guards, work area, personnel, apparel, and tool handling.
Addresses grounding, proper cords, and electrical connections for safe operation.
Explains proper grounding for shock prevention and safe electrical connection.
Lists capacities, cutterhead, motor, dust collection, dimensions, and weights.
Explains how to set and adjust the cutting depth for planing.
Details the procedure for safely replacing planer knives.
Explains how to set rollers for optimal planing performance.
Describes how to change the machine's feed speed for different operations.
Outlines the process for setting planer knives correctly for optimal cut.
Step-by-step guide for safely installing molding cutters into the cutterhead.
Adjusting feed rollers for optimal performance during molding operations.
Lists common mechanical/electrical issues and their remedies.
Addresses issues like snipe, fuzzy grain, torn grain, and poor feeding.
To Next Page
