To Next PageTo Next Page
Need help?Do you have a question about the Jet JPT-260 and is the answer not in the manual?
General| Model | JPT-260 |
|---|---|
| Type | Planer |
| Planing Width | 260 mm |
| Planing Thickness | 3 mm |
| Feed Rate | 5 m/min |
| Number of Knives | 3 |
| Max. Planing Width | 260 mm |
| Max. Planing Depth | 3 mm |
| Table Size | 1000 mm x 260 mm |
| Maximum Cutting Width | 260 mm |
| No-load Speed | 5000 RPM |
| Cutter Block Diameter | 63 mm |
Defines the intended purpose and limitations for operating the machine.
Details potential risks like kickback, drawing-in, and health hazards from dust and noise.
Describes the procedures and safety precautions for jointing and planing operations.
Details the process and safety for thicknessing wood workpieces.
Step-by-step guide for safely replacing the machine's cutter knives.
