Jet JWBS-14DX - Fasteners

Fasteners for JWBS-14DX
A. Saw Body to Stand
4 – M8x40 hex cap screws
(approx. 1-1/2" long)
8 – M8 flat washers
4 – M8 lock washers
4 – M8 hex nuts
B. Strain Relief Plate to Stand
2 – M5x12 pan head machine screws
C. Belt Cover to Base
2 – Knobs
D. Trunnion Bracket to Saw Body
2 – M8x30 hex cap screws
(approx. 1-1/4" long)
2 – M8 lock washers
1 – M8x80 hex cap screw (for table stop -
(approx. 3-1/8” long)
1 – M8 hex nut