-----------.
.
ALWAYS USE SAFETY GLASSES. Also use face or dust masks if the cutting operation is dusty-
Everyday eyeglasses only have impact resistant lenses, they are NOT safety glasses.
'-'-"
.
SECURE WORK. Use clamps or a vise to hold the work when its practical. It's safer than using your
hand and it frees bothhands to operatethe tool.
.
DON'T OVERREACH. Keep properfootingand balanceat all times.
.
MAINTAIN TOOLS WITH CARE. Keeptools sharp and cleanfor best and safest performance. Follow
instructions for lubricatingand changingaccessories.
.
DISCONNECT TOOLS before servicing; when changing accessories, such as blades, bits cutters, and
the like.
.
REDUCETHE RISKOF UNINTENTIONALSTARTING. Makesure the switch is inthe off position
before plugging in the machine.
.
USE RECOMMENDEDACCESSORIES. Consult the owner's manual for recommendedaccessories.
The use of improperaccessoriesmay cause a risk of injury.
.
NEVER STAND ONA TOOL. Serious injurycould occur if the tool is tipped or if the cutting tool is
unintentionally contacted.
-
.
CHECK DAMAGEDPARTS. Beforefurther useof the tool, a guard or other part that is damaged
should be carefullychecked to determinethat it will operateproperlyand perform its intendedfunction.
Check for alignmentof movingparts, bindingof moving parts, breakageof parts, mounting, and any
other conditionsthat may affect its operation. A guard or other part that is damaged should be properly
repaired or replaced.
.
DIRECTIONOF FEED. Feedwork into a blade or cutter againstthe direction of rotation of the blade or
cutter only.
.
NEVER LEAVE THE TOOL RUNNINGUNATTENDED. TURNTHE POWER OFF. Don't leave the
tool until it comes to a complete stop.
- -- - - ~
- - - - - - -- ~ - - - ,.
'-
To Next Page
Loading...
