Need help?Do you have a question about the Jet JWS-22CS and is the answer not in the manual?
General| Brand | Jet |
|---|---|
| Model | JWS-22CS |
| Category | Power Tool |
| Language | English |
Explains what defects are covered, who is covered, and the period of coverage.
Details how to get service, state law application, and warranty limitations.
Covers essential safety practices like eye protection, keeping clear of moving parts, and work area safety.
Includes instructions on securing work, proper tool maintenance, and electrical safety.
Provides a guide for selecting the correct gauge extension cord based on length and amperage.
Instructions for connecting the shaper to a 115V power source, including adapter use.
Procedure for reconfiguring motor leads and replacing the plug for 230V operation.
Lists detailed specifications such as stock number, speeds, table size, and motor details.
Introduces the shaper and advises reviewing the manual for optimal use and service information.
Steps for safely unpacking the shaper and cleaning protected parts.
Lists tools required, contents of the shipping container, and initial dust chute assembly.
Crucial warnings about power disconnection and operating without safety shields.
Step-by-step guide to detach the arbor from the main spindle.
Instructions for reattaching the arbor, reversing the removal steps.
Process for installing a collet, inserting a router bit, and tightening.
Guides on adjusting fence halves, spindle guard height/depth, and hold-down clamps.
How to raise, lower, and lock the spindle for desired cutting height.
Best practices for using the fence as a guide for safe and effective shaping.
Key rules for safe operation and best results when shaping with collars and starting pin.
Discusses positioning collars above, below, or between cutters and their operational effects.
Strong warning about starting pin use and a procedure for its application.
Guidance on applying lubricant to the spindle for smooth operation and bearing maintenance.
Addresses power supply, circuit, and overload trip problems.
Solutions for cutter speed, unsatisfactory cuts, and vibration.
Troubleshooting vibrations, edge splits, raised areas, and spindle raising problems.
Tips for fixing work burns, cut height variations, and achieving smooth finishes.
Exploded view illustrating parts of the table and fence assemblies.
Detailed exploded view of the fence assembly parts.
Catalog of shaper parts from index number 1 to 35, including part numbers and descriptions.
Catalog of shaper parts from index number 36 to 83, including part numbers and descriptions.
Catalog of shaper parts from index number 84 to 112, including part numbers and descriptions.
Includes notes regarding included items in kits and spindle size references.
Schematics showing the wiring for 230V and 115V motor configurations.
Diagram detailing the electrical connections for the forward and reverse switch.
To Next Page
