Jetson Copperhead JCOPHD-BLK - Assembling the Handlebar

17
1.3 Assembling the Handlebar
1. LOOSEN AND REMOVE THE KNOB BY TURNING IT OFF CLOCKWISE. SLIDE THE FLAT WASHER OFF THE END OF THE
LATCH STEM.
2. KEEPING THE CURVED WASHER ON THE LATCH STEM, PULL THE LATCH UP UNTIL THE STEM CLEARS FROM THE CLAMP
TOP. SET ALL PIECES OF HARDWARE ASIDE.
3. LIFT OPEN THE CLAMP TOP.
LATCH
LATCH STEM
CURVED WASHER
FLAT WASHER
KNOB
CLAMP TOP
1
2
3