IT TAKES ABOUT 7 HOURS TO BRING A DEPLETED BATTERY TO FULL CHARGE.
2.1 Charging the Battery
2. Preparing to Ride
CHARGING PORT WITH COVER
1. CONNECT THE CHARGING CABLE WITH THE CHARGER.
2. PULL OPEN THE CHARGING PORT COVER ON THE SCOOTER.
3. PLUG THE CHARGING CABLE INTO THE WALL, AND THEN PLUG THE CHARGER INTO THE CHARGING PORT.
4. WHEN THE INDICATOR LIGHT ON THE CHARGER TURNS FROM RED TO GREEN, THE BATTERY HAS REACHED FULL
CHARGE. REMOVE THE CHARGER FROM THE CHARGING PORT AND UNPLUG THE CABLE FROM THE WALL OUTLET.
5. CLOSE THE CHARGING PORT COVER.
To Next Page
Loading...
Need help?
General
