12. ROTATE THE LATCH, IF NECESSARY, AND CLOSE IT TOWARDS THE FRONT OF THE SCOOTER SO THAT IT RESTS ON TOP OF
THE CLAMP.
NOTE: IF YOU CANNOT OPEN OR CLOSE THE LATCH, THE KNOB MAY BE TOO TIGHT. LOOSEN IT BY ½ CLOCKWISE
ROTATION AT A TIME UNTIL YOU ARE ABLE TO UTILIZE THE LATCH.
13. CHECK THAT THE HANDLEBAR IS SECURE IN THE CLAMP.
IMPORTANT: IF THE HANDLEBAR IS STILL NOT SECURED BY THE CLAMP, TIGHTEN THE KNOB FURTHER BY
TURNING IT COUNTERCLOCKWISE.
HANDLEBAR
HANDLEBAR
CLAMP
To Next Page
Loading...
