Jetson Copperhead JCOPHD-BLK - Selecting and Using Speed Modes

33
THE COPPERHEAD REQUIRES SOME KICKMOTION ACTIVATION TO START THE MOTOR.
1. PLACE ONE FOOT AT THE FRONT OF THE DECK FACING FORWARD.
2. USE THE OTHER FOOT TO PROPEL THE SCOOTER FORWARD BY PUSHING OFF THE GROUND WITH 1 LARGE KICK.
3. ONCE THE SCOOTER GETS MOMENTUM, USE YOUR RIGHTHAND THUMB TO PUSH AND HOLD THE ACCELERATION
THROTTLE.
4. WHEN THE MOTOR KICKS IN, PLACE YOUR KICKING FOOT AT THE BACK OF THE DECK, TURNED OUTWARD AT A 70  90°
ANGLE TO PROVIDE STABILITY.
THROTTLE
4.1 Starting & Riding
4. Making Moves