Jetson Copperhead JCOPHD-BLK - Page 22

20
6. WITH THE CURVED WASHER STILL ON THE STEM OF THE CLAMP LATCH, SLIDE THE STEM DOWN INTO THE SET OF
ALIGNED HOLES FROM ABOVE THE CLAMP.
7. SLIDE THE FLAT WASHER ONTO AND UP THE EXPOSED END OF THE STEM.
8. TWIST THE KNOB ONTO THE END OF THE STEM BY TURNING IT ON COUNTERCLOCKWISE BUT DO NOT FULLY TIGHTEN IT.
LATCH
LATCH STEM
CURVED WASHER
FLAT WASHER
KNOB