Jetson Copperhead JCOPHD-BLK - Operating the Scooter Lights

28
CHANGING THE ODOMETER DISPLAY
YOUR SCOOTER TRACKS DISTANCE TRAVELED IN TWO WAYS:
ODOMETER ("ODO")  TOTAL DISTANCE TRAVELED ON THIS SCOOTER.
TRIP ODOMETER ("TRP")  TOTAL DISTANCE TRAVELED DURING A SINGLE USE OF THE SCOOTER.
NOTE: THE TRIP ODOMETER WILL RESET EVERY TIME THE SCOOTER IS POWERED OFF.
TO TOGGLE THE DISPLAY BETWEEN "ODO" AND "TRP": QUICKPRESS THE POWER BUTTON 2 TIMES IN A ROW.
TO CHANGE THE UNIT OF MEASUREMENT BETWEEN KILOMETERS TO MILES:
1. SIMULTANEOUSLY PRESS AND HOLD THE “+” AND ““ BUTTONS FOR 1 SECOND TO ENTER THE SETTINGS MENU.
2. QUICKPRESS THE POWER BUTTON UNTIL “P1” DISPLAYS ON THE SCREEN.
3. QUICKPRESS THE “+” OR ““ BUTTON TO SWITCH BETWEEN MILESMPH REPRESENTED BY "001" AND
KILOMETERSKMH REPRESENTED BY "000".
4. QUICKPRESS THE POWER BUTTON 2 TIMES IN A ROW TO SAVE THE SETTING AND EXIT THE FIELD.
5. TO RETURN TO THE HOME PAGE, SIMULTANEOUSLY PRESS AND HOLD THE “+” AND ““ BUTTONS FOR 2 SECONDS.
NOTE: IF NO ACTION IS TAKEN FOR 10 SECONDS WHILE YOU ARE IN THE SETTINGS MENU, THE SYSTEM WILL
AUTOMATICALLY REVERT BACK TO THE RIDING DISPLAY SCREEN.