1.9 Charging the Battery
CHARGING PORT
THE BATTERY CAN BE CHARGED WHILE INSTALLED IN
THE BIKE OR WHEN REMOVED FROM THE BIKE.
CHARGING INSTALLED BATTERY
1. POSITION THE HAZE NEAR AN ELECTRICAL WALL OUTLET.
2. PLUG THE CHARGER INTO THE WALL OUTLET BEFORE PLUGGING THE
OTHER END INTO THE BIKE'S CHARGING PORT.
3. CHARGE THE BATTERY UNTIL IT IS FULLY CHARGEDUP TO 5 HOURS.
4. PLACE THE COVER OVER THE CHARGING PORT WHEN DONE.
* IMPORTANT: ONLY USE THE INCLUDED CHARGER. DO NOT USE THE
CHARGER FOR OTHER PRODUCTS. DO NOT TURN ON THE HAZE WHILE
IT IS CHARGING. REMOVE THE CHARGER WHEN THE BATTERY IS FULLY
CHARGED TO AVOID DAMAGE TO THE BATTERY.
5. DO NOT LEAVE THE HAZE CHARGING OVERNIGHT.
To Next Page
Loading...
