JF 40P - Technical Specifications

9
3.3- Technical specifications
Drive ............................................................................................................... Electric motor
Power of the motor ............................................................... 7,5 hp to 10 hp (5,5 to 7,5 kw)
Work speed ............................................................................................ 2.400 to 2.600 rpm
Cutting knives ............................................................................................................ 3 units
Driving belt ..................................................................................................................... A55
Pulley diameter which follow the machine:
- To 60 Hz motor ..................................................................................... 140 mm (2 groves)
- To 50 Hz motor ..................................................................................... 160 mm (2 groves)
Impeller pulley diameter ......................................................................... 195 mm (2 groves)
Machine approximate weight (without motor) ............................................................ 118 kg
Note: The motor, depending on the power, can weight up to 72 Kg.
Dimensions (see picture below)
A (height) .............................................................................................................. 1.418 mm
C (lenght) .............................................................................................................. 1.400 mm
L (width) ................................................................................................................ 1.238 mm
Front view
RH side
A
L
C
OPERATION TECHNICAL MANUAL - FORAGE CHOPPER JF 40P
English