EasyManua.ls Logo

JF 1300 S2 - User Manual

JF 1300 S2
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Rev. 00
JF 1300 S2
OPERATION TECHNICAL MANUAL
MANUAL TÉCNICO DE OPERACIÓN
GRASS HEAD - CABEZAL DE PASTO

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the JF 1300 S2 and is the answer not in the manual?

Summary

Introduction

Safety Recommendations

General Safety Advice

Covers initial safety advice including manual reading, seating, torques, and protective covers.

Operating Safety

Lists crucial safety rules and precautions to follow while operating the machine.

Personal Protective Equipment (IPE)

Details the mandatory Personal Protective Equipment (IPE) to be used during operation for operator safety.

Maintenance and Transport Safety

Covers safety measures for maintenance and guidelines for transporting the machine on roads and trucks.

Transport with Tow Car or Piler Safety

Explains safe procedures for handling and transporting the machine using tow cars or pilers.

Detailed Safety Labels

Provides detailed explanations and illustrations of various safety labels and their meanings on the machine.

Machine Presentation

Available Versions

Lists the different forage harvesters the JF 1300 S2 can be coupled with.

Components Identification

Identifies the key components of the JF 1300 S2 Grass Head by number.

Running

Explains the basic working principle and how the machine cuts and collects grass.

Technical Specifications

Provides detailed technical data including weight, dimensions, PTO speed, and output estimates.

Preparation of the Machine

Coupling: Pulley and Belts

Step-by-step guide on coupling the JF 1300 S2 using the pulley and belts version.

Coupling: Cardan Shaft

Step-by-step guide on coupling the JF 1300 S2 using the cardan shaft version.

Adjustments for Operation

PTO Speed

Specifies the required PTO speed (540 rpm) for optimal operation and checks.

Harvest Ground Speed

Discusses the importance of selecting the correct ground speed for crop conditions and productivity.

Description of Operation

Maintenance Instructions

Grease Lubrication Points

Identifies specific points requiring grease lubrication and the recommended type of grease.

Gearbox Maintenance

Explains how to check and maintain the oil level and perform oil changes for the gearbox.

Cutting System Maintenance

Provides instructions on oil level checks and oil changes for the cutting system.

Drive Shaft Maintenance

Details the steps for lubricating and maintaining the drive shaft.

Drive Shaft Length Adjustment

Guides on how to adjust the length of the drive shaft for proper installation.

Machine Preservation

Outlines steps to preserve the machine after use and protect it from weather.

Care Between Harvests

Provides guidelines for periodic maintenance and checks during off-season periods.

Additional Information

Key Gauge Table

Provides a reference table for key gauges in both inch and metric units.

Torque Table

Lists torque values for various bolt sizes and resistance classes/degrees.

Technical Assistance

Warranty Term

JF 1300 S2 Specifications

General IconGeneral
BrandJF
Model1300 S2
CategoryFarm Equipment
LanguageEnglish

Related product manuals