Lubricate the greasers after a job period because the grease flow better when the
machine is warm.
7 - Maintenance instructions
7.1 - Grease lubrication points:
Recommended grease
Only use Lithium grease class NLGI-2
Lubrication points
There are three grease lubrication points:
1- Base of the pulleys (both versions, with cash or pulleys);
2- Cardan shafts;
3- Belts strainer (version of cardan shafts).
1
2
1
3
23
OPERATION TECHNICAL MANUAL - JF 1300 GRASS HEAD SERIES 2
English
To Next Page
Loading...
