6
7- Do not allow children or other people to get close to
the machine when it is in operation or in movement.
8- Be aware of the correct operation and maintenance
of the machine. Before using it the first time, present this
guide and instruct the people involved.
9- Always keep your equipment in perfect preservating
conditions.
10- Make the machine coupling on a flat and even
place, because that turns the procedure easier and
safer.
11- In narrow passages, make sure there is enough
width to pass without interference.
12- Use only tractors duly dimensioned for the machine.
13- Never remove the decals from the machine.
6- Never allow unskilled people to operate
the machine or the tractor.
5- Loose clothes or long hair might caught by moving
mechanisms. Therefore, never get close to operate the
machine in such conditions.
14- Only remove the shields and
protecting covers if it’s required for
maintenance. Never work the machine
without them.
15- Always operate with the correct PTO
speed (540 rpm). The excessive rotation
presents risks to their safety.
When operating the machine:
1- Avoid grease, oil or dust building-up on the machine.
2- Never feed the equipment manually.
3- Never attempt to adjust or repair
components with the machine in
movement.
4- Do not start the equipment without the
protecting covers or structures.
To Next Page
Loading...
