15
4.2- Forage Chopper adjustments
When you operate the Forage Chopper, adjust the
chute position (1) and the deflector (2) according next
steps:
Chute (1)
Turn the chute manually according desired position. If
necessary, release the nuts (1a) to turn the chute easily.
Then, re-tighten the nuts (1a) a little bit.
Deflector (2)
Loosen the wing nuts (2a) and position the deflector as
desired.
The more lifted up is the deflector, higher and far away
the product will be thrown and vice-versa.
Then, re-tighten the nut (2a).
2a
1a
OPERATION TECHNICAL MANUAL - FORAGE CHOPPER JF 40P
English
To Next Page
Loading...
