18
MODEL
Number of channels
4
Maximum power 13.8Vdc - 2Ohm*
400W RMS (4x95WRMS)
Maximum power 13.8Vdc - 4Ohm*
252W RMS (4x63WRMS)
Maximum bridged power 13.8Vdc -
4Ohm *
400W RMS (2x190WRMS)
Input Sensitivity 200mV (with Level a 100%)
Total harmonic distortion
0,03%
Signal-to-noise ratio
>90dB
Low pass filters (L.P.F)
Adjustable (-24dB per octave)
Input impedance
22kOhms
Protection system
Thermal and short output
Minimum supply voltage
9Vdc
Maximum supply voltage
Consumption at rest
0,5A a 13,8V
Stand by consumption
2,6mA a 13,8V
Maximum musical consumption at
13.8Vdc
17,5A
Maximum sinusoidal consumption
(1kHz) at 13.8Vdc
35A
Dimensions WxHxD
Weight
AP 400x4 AP 800x4
16Vdc
Frequency response
20hz a 20kHz (-3db)
High pass filters (H.P.F)
Adjustable (-24dB per octave)
7. TECHNICAL SPECIFICATIONS
140x48x143
0,67kg
4
800W RMS (4x200W RMS)
504W RMS ( 4x504WRMS)
800W RMS (2x400W RMS)
200mV (with Level a 100%)
0,03%
>90dB
Adjustable (-24dB per octave)
22kOhms
Thermal and short output
9Vdc
0,8A a 13,8V
2,6mA a 13,8V
44A
88A
16Vdc
20hz a 20kHz (-3db)
Adjustable (-24dB per octave)
140x48x173
0,83kg
Power measured at 1kHz in resistive load, at the indicated impedance, with THD<=10% and V = 13.8V. Due to natural tolerances
of internal components and manufacturing processes, the technical characteristics shown may vary."
AP400 AND AP800 AUDIO AMPLIFIER - INSTRUCTION MANUAL
To Next Page
Loading...