JGaurora A5 User Manual

1. Please see the Warranty Card for details on our policies for repair and support.
2. If your printer is malfunctioning or damaged, for your safety, and to avoid further damaging the printer, please
contact the after-sale se rvice center or our support team for advice first, before attempting any repair.
19
7. Supports and service

JGaurora A5 Specifications

General

Build Volume	305 x 305 x 320 mm
Layer Resolution	0.05 - 0.3 mm
Print Speed	10 - 150 mm/s
Nozzle Diameter	0.4 mm
Filament Diameter	1.75 mm
Connectivity	USB, SD Card
Frame Material	Aluminum
Print Technology	FDM (Fused Deposition Modeling)
Heated Bed	Yes
Bed Temperature	Up to 110°C
Nozzle Temperature	Up to 250°C
Supported Materials	PLA, ABS
Display	LCD
Power Supply	110V / 220V