Need help?Do you have a question about the JGaurora A5 and is the answer not in the manual?
General| Build Volume | 305 x 305 x 320 mm |
|---|---|
| Layer Resolution | 0.05 - 0.3 mm |
| Print Speed | 10 - 150 mm/s |
| Nozzle Diameter | 0.4 mm |
| Filament Diameter | 1.75 mm |
| Connectivity | USB, SD Card |
| Frame Material | Aluminum |
| Print Technology | FDM (Fused Deposition Modeling) |
| Heated Bed | Yes |
| Bed Temperature | Up to 110°C |
| Nozzle Temperature | Up to 250°C |
| Supported Materials | PLA, ABS |
| Display | LCD |
| Power Supply | 110V / 220V |
To Next Page
