EasyManua.ls Logo

JHPK H30 - User Manual

Default Icon
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
H30 – Owners Manual
Polyurethane foaming equipment

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the JHPK H30 and is the answer not in the manual?

Summary

Safety Information

Operational Safety Precautions

Essential safety warnings covering electrical, fire, pressure, and personal hazards.

System Installation and Configuration

Technical Data

Details system specifications like material ratio, output, and dimensions.

Air-Powered FRL Combination

Explains the FRL unit components and their operational requirements.

Raw Material Pipe System Installation

Guide for setting up the material feed and discharge piping.

Air, Power, and Control Connections

Requirements for air source, power, and initial control panel connections.

Control Panel and Operation Controls

Run;Retract Switch and Emergency Stop

Operation of the run/retract switch and emergency stop button.

Heater Control and Temperature Settings

How to use the self-lock start button and set temperature controllers.

Master Power and Electrical Cabinet

Information on the master power switch and electrical cabinet layout.

System Operation and Maintenance

Pre-operational Inspection and Initial Start-up

Steps for checking the system and performing the first startup.

Daily Shutdown and Maintenance

Procedures for shutting down daily and performing routine maintenance.

Troubleshooting and Booster Pump Maintenance

Inspection for flow issues, host failures, and booster pump repair.

Technical Diagrams and Parts

Assembling and Parts List for Booster Pump

Exploded views and part numbers for booster pump components.

Schematic and Wiring Diagrams

Circuit, control panel, and electrical cabinet wiring diagrams.

JHPK H30 Specifications

General IconGeneral
BrandJHPK
ModelH30
CategoryCleaning Equipment
LanguageEnglish